Congratulations! You are now on the waiting list, please check your inbox for our confirmation email!
If you're looking to install a backlit LCD on your WonderSwan Color, this kit is for you! After a straightforward installation, this LCD kit will have you up and running with a clear, crisp backlit display for your console.
- Backlit LCD with glass screen lens
- Straightforward installation with minimal soldering (two wires)
- Touch brightness control
- 1 x Backlit LCD
- 1 x PCB
- 1 x Ribbon Cable
- 1 x Glass Screen Lens
- 1 x Double-sided tape
- 2 x Wires
- 1 x Screwdriver
- Ribbon is very fragile, be sure to install carefully.
- We strongly recommend testing the display before completing the installation; we are unable to accept returns on kits that have been installed in a console
- Colors may vary from what you see on your display
- This is an aftermarket product and may not feel identical to its genuine counterpart
- Too much pressure can permanently damage the screen and result in rows of dead pixels. Do not force the shell closed around the LCD.
- LCD may break under pressure or if dropped. We recommend you exercise care when installing this product.
- Ribbon cable is fragile; be sure to install it carefully.
Somebody needs to 3D print a case for a lithium battery for this device. Or at least a plastic battery holder for 2 AA. It wouldn't add very much heft to the device; the original battery compartment buldges a bit and I could put up with two bulges in exchange for double playtime.