Tutorials RSS

DMG, Game Boy, LSDJ -

The GBA has a very awkward button layout when used with LSDj. This mod converts the trigger buttons to 'start' and 'select' allowing for comfortable use with LSDj. Keep in mind that you will need to add a switch if you would like the buttons to work as per normal again. You'll need to note the pads:TP2 = Select signalTP3 = Start signalThe triggers signals unfortunately don't have pads like this, as they go pretty much directly into a resistor. (R43 and R44)It's as simple as soldering pad TP2 to a trigger signal, and TP3 to the other signal, then...

Read more

Gameboy Advance -

This tutorial explains how to install our Gameboy Advance Rechargeable Battery Pack. You will learn how to properly trim your GBA shell and battery door to get a perfect looking result.

Read more

The following tutorial will guide you through the process of installing a voltage regulator inside an AGB-001 + AGS-101 LCD mod.

Read more

Here is a simple guide to help you guys figure out which ribbon with switch you need to do your mod AGS-101 to GBA mod. 1. Find your board number You will need to find out the board number of your AGB. Open up the battery compartment and look where the battery cover clips, there is a tiny number written on the AGB board under. The first number is either 0 or 1.  This number starts with a 0: 40 pins board.  This number starts with a 1: 32 pins board. 2. Find a compatible ribbon The following table to know which ribbon...

Read more